Journal Papers

SA Mortazavizadeh, A Ghaderi, M Hajian, M Ebrahimi, "A fault-tolerant steer-by-wire system based on angular position estimation," Electrical Engineering 103 (5), 2403-2414, 2021

 

SA Mortazavizadeh, M Ebrahimi, A Ghaderi, M Hajian, "Fault-tolerant control of steer-by-wire systems under voltage and current sensors faults," Electrical Engineering 103 (1), 407-415, 2021

 

M Afshar, S Abdi Jalebi, A Oraee, M Ebrahimi, R McMahon, "Eccentricity fault detection in brushless doubly fed induction machines," IET Electric Power Applications 15 (7), 916-930, 2021

 

SA Mortazavizadeh, A Ghaderi, M Ebrahimi, M Hajian, "Recent developments in the vehicle steer-by-wire system," IEEE Transactions on Transportation Electrification 6 (3), 1226-1235, 2020

 

M Afshar, A Tabesh, M Ebrahimi, SA Khajehoddin, "Stator short-circuit fault detection and location methods for brushless DFIMs using nested-loop rotor slot harmonics," IEEE Transactions on Power Electronics 35 (8), 8559-8568, 2019

 

H Mirahki, M Moallem, M Ebrahimi, B Fahimi, "Asymmetrical magnet shape optimization based on SC mapping for torque profile mitigation in unidirectional application of SPMS machine,"  IEEE Transactions on Transportation Electrification 5 (3), 630-637, 2019

 

H Mirahki, M Moallem, M Ebrahimi, B Fahimi, "Combined ON/OFF and conformal mapping method for magnet shape optimisation of SPMSM," IET Electric Power Applications 12 (9), 1365-1370, 2018

 

M Mohamadi, A Rashidi, SMS Nejad, M Ebrahimi, "A switched reluctance motor drive based on quasi Z-source converter with voltage regulation and power factor correction," IEEE Transactions on Industrial Electronics 65 (10), 8330-8339, 2017

 

HH Safa, M Ebrahimi, HA Zarchi, M Abshari, "Eccentricity fault detection in permanent magnet synchronous generators using stator voltage signature analysis," International Journal of Precision Engineering and Manufacturing 18 (12   , 2017

 

G Esfandiari, M Ebrahimi, A Tabesh, "Instantaneous torque control method with rated torque-sharing ratio for cascaded DFIMs,"  IEEE Transactions on Power Electronics 32 (11), 8671-8680, 2017

 

E Rezaei, M Ebrahimi, A Tabesh, "Control of DFIG Wind Power Generators in Unbalanced Microgrids Based on Instantaneous Power Theory," IEEE Transactions on Smart Grid, 1-8, 2016

 

G Esfandiari, H Aran, M Ebrahimi, "Compherensive Design of a 100 kW/400 V High Performance AC-DC Converter,"  Advances in Electrical and Electronic Engineering 13 (5), 417-429, 2015

 

A Gholabi, M Ebrahimi, GR Yousefi, M Ghayour, A Ebrahimi, H Jali, "Sensorless anti-swing control for overhead crane using voltage and current measurements," Journal of Vibration and Control 21 (9), 1745-1756, 2015

 

G Esfandiari, M Ebrahimi, A Tabesh, M Esmaeilzadeh, "Dynamic modeling and analysis of cascaded DFIMs in an arbitrary reference frame," IEEE Transactions on Energy Conversion 30 (3), 999-1007, 2015

 

M Ebrahimi, M Moallem, MH Ershadi, AH Ebrahimi, "Current Limitation and Speed Drop Minimization in Optimal-Efficiency of Induction Motors," Journal of Iranian Association of Electrical and Electronics Engineers 12 (3..   2015

 

H. Hooshmandi, M. Ebrahimi, A. Davoudi, A. Pouramin, "Analytical Derivation of Induction Motors Inductances under Eccentricity Conditions," Progress in Electromagnetics Research B, 2014.

 

A. Gholabi, M. Ebrahimi, GR. Yousefi, M. Ghayour, A. Ebrahimi, H. Jali, "Sensorless anti-swing control for overhead crane using voltage and current measurements," Journal of Vibration and Control, Doi. 1077546313500367, 2013.

 

E. Rezaei, A. Tabesh, M. Ebrahimi, "Dynamic model and control of DFIG wind energy systems based on power transfer matrix," Power Delivery, IEEE Transactions on, Vol. 27 (3), 2012.

M.Ebrahimi, M. Ghayour, S. Madani, A. Khobroo, "Swing Angle Estimation for Anti-Sway Overhead Crane Control Using Load Cell," International Journal of Control Automation and Systems, Vol. 9, No. 2, 2011.

 

R. Sharifi, M.Ebrahimi, "Detection of Stator Winding Faults in Induction Motors using Three-Phase Current Monitoring," ISA Transaction, Vol. 10, PP. 560-568, 2010.

 

M. H. Ershadi, M. Moallem, M. Ebrahimi, "Loss-minimization Scheme in Modified DTC-SVM for Induction Motors with Torque Ripple Mitigation," Journal of Applied Science, Vol. 10, No. 19, PP. 2269-2275, 2010.

 

E. Rezaei, M. Ebrahimi, "Simultaneous Estimation of Speed and Rotor and Stator Resistance in Induction Machines at Motoring and Generating Condition," (in Persian), Modares Journal of Electrical Engineering, Vol. 10, No. 2, 2010.

 

A. Moshari, A. Ebrahimi, S. Sadri, M. Ebrahimi, "Filtering out the Training Data of ANN and Evaluation of its Effect on Error Reduction in Short-Term Load Forecasting in Power Systems, (in Persian)," Esteghlal Journal, Vol. 28, No. 2, 2010.

 

M. Ebrahimi, G. Esfandiari, A. R. Azimian, "Efficiency Optimization in a Pump-Induction Motor Drive, Under Flow Variation, Using Fuzzy Search Controller," (in Persian), Modares Technical and Engineering, No. 38, 2010.

 

A. Sadoughi, M. Ebrahimi, M. Moallem, S. Sadri, "Intelligent Diagnosis of Broken Bars in Induction Motors Based on New Features in Vibration Spectrum," Journal of Power Electronics, Korea, 2008.

 

A.R. Sadougi, M. Ebrahimi, A. Ebrahimi, "Induction Motor Broken Bar Diagnosis Using Vibration Spectrum in the Presence of Obtrusive Frequency Components," (in Persian), Modares Technical and Engineering, No. 30, 2008.

 

M. Ebrahimi, E. Rezaei, "Stator Resistance Estimation in Direct Vector Control for High Performance Torque Controlled Induction Motor Drives," (in Persian), Modares Technical and Engineering, No. 30, 2008.

 

M. Ebrahimi, E. Rezaei, B.Vaseghi, M. Danesh, "Rotor Resistance Identification using Neural Networks for an Induction Motor Drives in the case of Insensitivity to Load Variations," Iranian Journal of Science & Technology, Vol. 36, No. B2, pp.223-236, April. 2006.

 

M. Mordian, M. Ebrahimi, M. Danesh, M. Bayat, "Detection of Broken Bars in Induction Motors Using a Neural Network," Journal of Power Electronics, Korea, Vol. 6, No.3, July 2006.

 

M. Ebrahimi, M. Moradiyan, H. Meshginkelk, M. Danesh, M. Bayat, "Neural Network Aided on-Line Diagnosis of Broken Bars in Induction Motors" (in Persian), Esteghlal Journal, No. 1, pp. 47-62, 1385.

 

M. Ebrahimi, A. Ghaderi, "An Evaluation of LPF and PCLPF and Present a Novel Method to Solve DC Offset Problem in Vector Control of Induction Motors" (in Persian), Esteghlal Journal, Vol. 24, No. 2, pp. 1-14, 2006.

 

E. Rezaei, M. Ebrahimi, M. Bayat, H. Nili, "Analysis and Improvement of Two-Motor Selsyn" (in Persian), Modarres Technical & Engineering Journal, No. 16, pp. 113-125, 2004.

 

M. Ebrahimi, H.R. Mirzaey, M. Ghayour, M.B. Bayate, "Modeling and Controlling of Overhead Crane Drive to Prevent Wearing of Wheels Rails," (in Persian), Amirkabir Journal of Science & Technology, Vol. 15 No. 58-B, 2004.

 

M. Ebrahimi, H. R. Mirzaei, "Analysis of Wheel and Rail Wearing and Evaluation of Overhead Crane Control in Steel Industry," (in Persian), Journal of Steel, No. 96, 2003.

 

M. Ebrahimi, "An Educational Software of Induction Motor Drives," (in Persian), Iranian Journal of Engineering Education," Vol. 3, No. 1, 2001.

 

M. Ebrahimi, H. Seifi, A. Shoulaie, H.S. Sarraf, "A Software Modification Procedure for Conversion of a Scalar Controller to a Vector Type for an Induction Motor,"  Iranian Journal of Science & Technology,Vol.23, No.1, Transaction B,1999.

 

M. Ebrahimi, A. Shoulaie, H. Seifi, V. Tahani, "Compensation of Rotor Time Constant Variations in Induction Machines Using Artificial Neural Networks," International Journal of Engineering Science, Vol. 8, No.2a, pp 81-95, 1995.